The Intel® Galileo board is based on the Intel® Quark SoC X1000, a 32-bit Intel Pentium®-class system on a chip (SoC). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with shields designed for the Arduino Uno R3.
The Galileo board is also software-compatible with the Arduino Software Development Environment, which makes getting started a snap.
In addition to Arduino hardware and software compatibility, the Galileo board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host port, USB Client Port, and 8 MByte NOR flash come standard on the board.
The genuine Intel processor and surrounding native I/O capabilities of the SoC provides for a fully featured offering for both the maker community and students alike. It will also be useful to professional developers who are looking for a simple and cost effective development environment to the more complex Intel® Atom™ processor and Intel® Core™ processor-based designs.
1x Intel® Galileo Board
1x USB microB Cable
1x "Universal" 5V Wall Wart
4x Screw and Standoff Set
Arduino Uno Rev3 Shield pin compatible
Mini PCI-express port
Micro SD card supported
Many Arduino Shields are compatible without migrate
Intel Quark SoC X1000 Application Processor. 400MHz, 32-bit Pentium class
16 KBytes on-die L1 cache
512 KBytes of on-die embedded SRAM
Simple to program: Single thread, single core, constant speed
ACPI compatible CPU sleep states supported
An integrated Real Time Clock (RTC), with an optional 3V “coin cell” battery for operation between turn on cycles.
256MB DDR3 DRAM
PSoC (programmable system on chip) from Cypress, I2C-controlled I/O expander chip
10/100 mbit/s Ethernet connector
USB 2.0 Host connector
USB 2.0 Client connector
10-pin Standard JTAG header for debugging
I2C, SPI, UART, ICSP be supported
There are two buttons:
Reboot button to reboot the processor
Reset button to reset the sketch and any attached shields
Intel Galileo main board x1
Power plug, has 5 adapters for different standards. x1